Schweitzer Engineering SEL-387-0, Instruction Manual

Page: 544 / 556

4
SEL-387-0, -5, -6 Relay Instruction Manual Date Code 20170601
SEL-387 Relay Command Summary
EVE R n Show raw analog data event report number n , with 1/16-cycle resolution.
Attach S m for 1/m-cycle resolution ( m = 4, 8, 32, 64).
EVE T Show event summary.
GRO Display active setting group number.
GRO n Switch to Setting Group n . (Will not function if any SS n Relay Word bit is asserted.)
HIS n Show brief summary of the n latest event reports.
HIS C Clear the brief summary and corresponding standard event reports.
ID Display variety of identification and configuration information about the relay.
INI INITIO command reports the number and type of I/O boards in the relay.
IRI Force synchronization attempt of internal relay clock to IRIG-B time-code input.
MET k Display metering data, in primary amperes. Enter number k to scroll metering k times on screen.
MET D k Display demand metering data, in primary amperes. Enter number k to scroll metering k times on screen.
MET DIF k Display differential metering data, in multiples of TAP. Enter number k to scroll metering k times on screen.
MET H Generate harmonic spectrum report for all input currents, showing first to fifteenth harmonic levels in secondary
amperes.
MET P k Display peak demand metering data, in primary amperes. Enter number k to scroll metering k times on screen.
MET RD n Reset demand metering values ( n = 1, 2, 3, 4, A).
MET RP n Reset peak demand metering values ( n = 1, 2, 3, 4, A).
MET SEC k Display metering data (magnitude and phase angle), in secondary amperes. Enter number k to scroll metering k
times on screen.
MET T Report temperature values of the 24 RTD inputs (SEL-387-5 and SEL-387-6 Relays only).
OPE n Assert the OC n Relay Word bit. Used to open breaker n if OC n is assigned to an output contact. JMP6B has to be
in place to enable this command.
PUL y k Pulse output contact y ( y = OUT101,…,OUT107, OUT2 XX , and OUT3 XX ). Enter number k to pulse for k sec-
onds [ k = 1 to 30 (seconds)], otherwise pulse time is 1 second. JMP6B has to be in place to enable this command.
QUI Quit. Returns to Access Level 0. Returns front-panel LEDs to the default targets.
SER d1 Show rows in the Sequential Events Recorder (SER) event report for date d1 .
SER d1 d2 Show rows in the Sequential Events Recorder (SER) event report from date d1 to d2 .
Entry of dates is dependent on the Date Format setting DATE_F (= MDY or YMD).
SER m n Show rows m through n in the Sequential Events Recorder (SER) event report.
SER n Show the latest n rows in the Sequential Events Recorder (SER) event report.
SER C Clear the Sequential Events Recorder (SER) event reports from memory.
SHO n Show relay group n settings. Shows active group if n is not specified.
SHO G Show relay global settings.
SHO P Show port settings and identification of port to which user is connected.
SHO P n Show port settings for port n ( n =1, 2, 3, 4).
SHO R Show Sequential Events Recorder (SER) settings.
STA Show relay self-test status.
TAR n k Show Relay Word row n status ( n = 0 through 41). Enter number k to scroll Relay Word row n status k times on
screen.
Append F to display targets on the front panel second row of LEDs.
TAR R Return front-panel LED targets to regular operation and reset the tripping front-panel targets.
Access Level B
Commands
The Access Level B commands allow the user to control breakers and contact outputs. All Access
Level 1 commands can also be executed from Access Level B. The screen prompt is: ==>