Schweitzer Engineering SEL-387-0, Instruction Manual

Page: 317 / 556

7.33
Date Code 20170601 Instruction Manual SEL-387-0, -5, -6 Relay
Serial Port Communications and Commands
SEL ASCII Protocol Details
Entering SHO P <Enter> is an easy way to identify the port to which you are
presently connected.
Settings cannot be entered or modified with this command. Change settings
with the
SET P command from Access Level 2. The following example shows
the factory default settings. Refer to Section 6: Setting the Relay for Settings
Sheets .
=>> SHO P <Enter>
Port 2
PROTO = SEL
SPEED = 19200 BITS = 8 PARITY = N STOP = 1
T_OUT = 0 AUTO = Y RTSCTS = N FASTOP = N
=>>
SHO R (Show SER Settings)
Access Levels 1, B, 2
SHOWSET R displays the Sequential Events Recorder settings. The syntax
of the SHO R command follows:
SHO R Setting <Enter>
➤
Setting specifies the setting name with which to begin. The
default is the first setting.
Settings cannot be entered or modified with this command. Change settings
with the
SET R command from Access Level 2. Refer to Section 6: Setting
the Relay for information on all settings. Following is an example of the
display for the SHO R command.
=>> SHO R <Enter>
SER1 =IN101, IN102, IN103, IN104, IN105, IN106
SER2 =OUT101, OUT102, OUT103, OUT104, OUT105, OUT106, OUT107
SER3 =0
SER4 =0
ALIAS1 =OUT101 B1TRIP
ALIAS2 =OUT105 B1CLOSE
ALIAS3 =OUT102 B2TRIP
ALIAS4 =OUT106 B2CLOSE
ALIAS5 =OUT103 B3TRIP
ALIAS6 =OUT107 B3CLOSE
ALIAS7 =NA
ALIAS8 =NA
ALIAS9 =NA
ALIAS10 =NA
ALIAS11 =NA
ALIAS12 =NA
ALIAS13 =NA
ALIAS14 =NA
ALIAS15 =NA
ALIAS16 =NA
ALIAS17 =NA
ALIAS18 =NA
ALIAS19 =NA
ALIAS20 =NA
=>>