Schweitzer Engineering SEL-387-0, Instruction Manual

Page: 281 / 556

Date _______________
Date Code 20170601 Instruction Manual SEL-387-0, -5, -6 Relay
SET.33
of 36 SEL-387-0, -5, -6 Relay Settings Sheets Example
Port Settings (SET P Command)
ALIAS12 = NA
ALIAS13 = NA
ALIAS14 = NA
ALIAS15 = NA
ALIAS16 = NA
ALIAS17 = NA
ALIAS18 = NA
ALIAS19 = NA
ALIAS20 = NA
Port Settings (SET P Command)
NOTE:
RTSCTS setting does not appear if PROTO = LMD or DNP. LMD PREFIX, ADDR, and SETTLE do
not appear if PROTO = SEL or DNP. See Appendix C: SEL Distributed Port Switch Protocol (LMD) for
details on LMD protocol and see Appendix G: Distributed Network Protocol for details on DNP
protocol.
Port 1 (SET P 1) Rear Panel, EIA-485 Plus IRIG-B
Port Protocol (SEL, LMD, DNP)
[RTDA, RTDB for SEL-387-5 and SEL-387-6 Relays only] PROTO = SEL
LMD Prefix (@, #, $, %, &) PREFIX =
LMD Address (1–99) ADDR =
LMD Settling Time (0–30 seconds) SETTLE =
Baud (300, 1200, 2400, 4800, 9600, 19200) SPEED = 2400
Data Bits (7, 8) BITS = 8
Parity Odd, Even, or None (O, E, N) PARITY = N
Stop Bits (1, 2) STOP = 1
Time-out (for inactivity) (0–30 minutes) T_OUT = 5
Send auto messages to port (Y, N) AUTO = N
Enable hardware handshaking (Y, N) RTSCTS = N
Fast Operate Enable (Y, N) FASTOP = N
Port 2 (SET P 2) Rear Panel, EIA-232 With IRIG-B
Port Protocol (SEL, LMD, DNP)
[RTDA, RTDB for SEL-387-5 and SEL-387-6 Relays only] PROTO = SEL
LMD Prefix (@, #, $, %, &) PREFIX =
LMD Address (1–99) ADDR =