Schweitzer Engineering Laboratories SEL-351-5, Instruction Manual

Page: 706 / 706

4
SEL-351-5, -6, -7 Relay Instruction Manual
Date Code 20070117
SEL-351-5, -6, -7 Relay Command Summary
Access Level 2
Commands
The Access Level 2 commands allow unlimited access to relay settings, parameters, and output
contacts. All Access Level 1 and Access Level B commands are available from Access Level 2. The
screen prompt is:
=>>
SET T Change text label settings.
SET ... TERSE For all SET commands, TERSE disables the automatic SHO command after settings entry.
STA C Resets self-test warnings/failures and reboots the relay.
VER Show relay configuration and firmware version.
a
Available in firmware versions 6 and 7.
Key Stroke Commands
Ctrl + Q Send XON command to restart communications port output previously halted by XOFF .
Ctrl + S Send XOFF command to pause communications port output.
Ctrl + X Send CANCEL command to abort current command and return to current access level prompt.
Key Stroke Commands When Using SET Command
<Enter> Retains setting and moves on to next setting.
^ <Enter> Returns to previous setting.
< <Enter> Returns to previous setting section.
> <Enter> Skips to next setting section.
End <Enter> Exits setting editing session, then prompts user to save settings.
Ctrl + X Aborts setting editing session without saving changes.