Schweitzer Engineering Laboratories SEL-351-5, Instruction Manual

Page: 355 / 706

8.35
Date Code 20070117
Instruction Manual SEL-351-5, -6, -7 Relay
Breaker Monitor, Metering, and Load Profile Functions
Load Profile Report (Available in Firmware Versions 6 and 7)
The date entries in the above example LDP commands are dependent on the
Date Format setting DATE_F. If setting DATE_F = MDY, then the dates are
entered as in the above examples (Month/Day/Year). If setting DATE_F =
YMD, then the dates are entered Year/Month/Day.
The load profile output has the following format:
=> LDP 7/23/96 <Enter>
<STX>
FEEDER 1 Date: mm/dd/yy Time: hh:mm:ss.sss
STATION A
FID=SEL-351-6-R3xx-VO-Zxxxxxx-Dxxxxxxxx CID=ABCD
# DATE TIME label1 label2 label3 label4 label5 ... labeln
512 07/23/96 07:00:35 xxxxx.xxx xxxxx.xxx xxxxx.xxx xxxxx.xxx xxxxx.xxx ...
xxxxx.xxx
511 07/23/96 08:00:15 xxxxx.xxx xxxxx.xxx xxxxx.xxx xxxxx.xxx xxxxx.xxx ...
xxxxx.xxx
510 07/23/96 09:00:01 xxxxx.xxx xxxxx.xxx xxxxx.xxx xxxxx.xxx xxxxx.xxx ...
xxxxx.xxx
<ETX>
=>
LDP 10 33 If LDP is entered with two numbers following it ( 10 and 33 in
this example; 10 < 33), all the rows between (and including)
rows 10 and 33 are displayed, if they exist. They display with the
oldest row (row 33) at the beginning (top) of the report and the
latest row (row 10) at the end (bottom) of the report. Chronolog-
ical progression through the report is down the page and in
descending row number.
LDP 47 22 If LDP is entered with two numbers following it ( 47 and 22 in
this example; 47 > 22), all the rows between (and including)
rows 47 and 22 are displayed, if they exist. They display with the
newest row (row 22) at the beginning (top) of the report and the
oldest row (row 47) at the end (bottom) of the report.
Reverse
chronological progression through the report is down the page
and in ascending row number.
LDP 3/30/97 If LDP is entered with one date following it (date 3/30/97 in this
example), all the rows on that date are displayed, if they exist.
They display with the oldest row at the beginning (top) of the
report and the latest row at the end (bottom) of the report, for the
given date. Chronological progression through the report is
down the page and in descending row number.
LDP 2/17/97 3/23/97 If LDP is entered with two dates following it (date 2/17/97 chro-
nologically precedes date 3/23/97 in this example), all the rows
between (and including) dates 2/17/97 and 3/23/97 are dis-
played, if they exist. They display with the oldest row (date
2/17/97) at the beginning (top) of the report and the latest row
(date 3/23/97) at the end (bottom) of the report. Chronological
progression through the report is down the page and in descend-
ing row number.
LDP 3/16/97 1/5/97 If LDP is entered with two dates following it (date 3/16/97 chro-
nologically follows date 1/5/97 in this example), all the rows
between (and including) dates 1/5/97 and 3/16/97 are displayed,
if they exist. They display with the latest row (date 3/16/97) at
the beginning (top) of the report and the oldest row (date 1/5/97)
at the end (bottom) of the report.
Reverse chronological progres-
sion through the report is down the page and in ascending row
number.
Example LDP Serial
Port Commands
Format