Schweitzer Engineering Laboratories SEL-351-5, Instruction Manual

Page: 704 / 706

2
SEL-351-5, -6, -7 Relay Instruction Manual
Date Code 20070117
SEL-351-5, -6, -7 Relay Command Summary
Access Level 1
Commands The Access Level 1 commands allow the user to look at settings information and not change it,
and to retrieve and reset event, recorder, and metering data. The screen prompt is:
=>
HIS n Show brief summary of n latest event reports, where 1 is the most recent entry. If n is not specified,
( HIS command) all event summaries are displayed.
HIS C Clear all event reports from nonvolatile memory.
IRI Force synchronization attempt of internal relay clock to IRIG-B time-code input.
LDP
a
Show entire Load Profile (LDP report.
LDP d1
a
Show all rows in the LDP report recorded on the specified date (see DAT command for date format).
LDP d1 d2
a
Show all rows in the LDP report recorded between dates d1 and d2 , inclusive.
LDP m n
a
Show rows m through n in the LDP report ( m = 1 to several thousand).
LDP n
a
Show latest n rows in the LDP report ( n = 1 to several thousand, where 1 is the most recent entry).
LDP C
a
Clears the LDP report from nonvolatile memory.
LDP D
a
Display the number of days of LDP storage capacity before data overwrite will occur.
MET k Display instantaneous metering data. Enter k for repeat count ( k = 1–32767, if not specified, default is 1).
MET D Display demand and peak demand data. Select MET RD or MET RP to reset.
MET E Display energy metering data. Select MET RE to reset.
MET M Display maximum/minimum metering data. Select MET RM to reset.
MET PM [ time ][ k ] Display synchrophasor measurements (available when TSOK = logical 1). Enter time to display the synchro-
phasor for an exact specified time in 24-hour format. Enter
k for repeat count.
MET X k Display same data as MET command with phase-to-phase voltages and Vbase. Enter k for repeat count ( k =
1–32767, if not specified default is 1).
QUI Quit. Returns to Access Level 0. Terminates SEL Distributed Port Switch Protocol (LMD) connection.
SER Show entire Sequential Events Recorder (SER) report.
SER d1 Show all rows in the SER report recorded on the specified date (see DAT command for date format).
SER d1 d2 Show all rows in the SER report recorded between dates d1 and d2 , inclusive.
SER m n Show rows m through n in the SER report ( m = 1–512).
SER n Show latest n rows in the SER report ( n = 1–512, where 1 is the most recent entry).
SER C Clears SER report from nonvolatile memory.
SHO n Show relay settings (overcurrent, reclosing, timers, etc.) for group n ( n = 1–6; if not specified, default is
active setting group).
SHO n L Show SEL
OGIC®
Control Equation settings for group n ( n = 1–6, if not specified; default is the SEL
OGIC
control equations for the active setting group).
SHO ... name For all SHO commands, jump ahead to specific setting by entering setting name.
SHO G Show global settings.
SHO P p Show serial port p settings, ( p = 1, 2, 3, or F; if not specified, default is active port).
SHO R Show SER and LDP Recorder
a
settings.
SHO T Show text label settings.
SSI
b
Show entire Voltage Sag/Swell/Interruption (SSI) report.
SSI d1
b
Show all rows in SSI report recorded on the specified date (see DAT command for date format).
SSI d1 d2
b
Show all rows in SSI report recorded between dates d1 and d2 , inclusive.
SSI m n
b
Show rows m through n in SSI report ( m = 1 to several thousand).
SSI n
b
Show latest n rows in SSI report ( n = 1 to several thousand, where 1 is the most recent entry).
SSI C
b
Clears SSI report from nonvolatile memory.
SSI R
b
Resets Vbase element. See Vbase initialization.
SSI T
b
Trigger the SSI recorder.