manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 204 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 204

9. Servicing / Maintenance

204 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

There are several confirm buttons on the

machine.

They must not show any mechanical

damage.
They must have a firm seat.

The position of the buttons is noted in this

chapter 

"6.4  Confirm Buttons (Page  93)"

.

EASY Software

1.

▹

Check if the button in EASY is grayed

out.

CrimpCenter

2.

▹

Check whether all confirm buttons are lit constantly.

Notice

In the following test different states of the button are checked. These states are represented

by graphics in the upper right corner of the EASY software. These graphics and their associ-

ated actions are shown in the following steps.

Press the button for up to 5 seconds.

3.

▹

Press and hold the confirm button.

» The graphic shown on the left appears.

Press the button for more than 5 seconds.

4.

▹

Press the confirm button and keep it

pressed for more than 5 seconds.

» The graphic shown on the left appears.

» The confirm buttons flash.

Press the button for more than 7 seconds.

5.

▹

Press the confirm button and keep it

pressed for more than 7 seconds.

» The graphic shown on the left appears.

» The confirm buttons do not light up.

6.

▹

Repeat the test with all other confirm buttons.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments