5. Product description
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
63 | 268
Double Gripper Module - SLD 4100
The SLD 4100 dual gripper module is used for double
crimping applications with leads that have an outside
diameter of 1 to 4 mm. The unit collects two wires in the
correct orientation and allows the gripper's gripper to pick
up the two wires for the crimping process.
The horizontal and vertical alignment is fully programma-
ble and no mechanical adjustments need to be made. The
lengths of the individual wires can be different. For opti-
mum crimp results, offsets can be programmed during
positioning.
Scope of Application
With the SLD 4100 double gripper module,
cable diameters of 1 to 4 mm can be pro-
cessed. Different lengths of the individual
wires are absolutely no problem. Alignment
of the wires for a vertical or horizontal dou-
ble crimp is fully programmable in the EASY
operator software and is done without the
use of tools.
Compact, completely pneumatic module
Different lengths of the single wires pos-
sible
Programmable wire alignment and off-
sets
All parameters fully programmable (no
mechanical settings)
Simple operation directly via the Crimp-
Center operator software EASY