manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 108 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 108

7. Installation / Mounting

108 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

7.2.5

(De-) Mounting - Dual ToolingShuttle (Option)

DANGER

Risk of injury if not observed!

You may suffer serious injuries, if the machine is not depressurized!

The following instructions are to be followed!

Put the main switch in position "OFF"!
Close the main valve.

WARNING

Danger of injury during commissioning, adjustment and set-up

work!

The following instructions are to be followed!

WARNING

Risk of injury during transportation!

The station weighs over 50 kg.

The following instructions are to be followed!

The transport may only be carried out with 2 persons and / or with

suitable aids.

If your CrimpCenter is equipped with Dual ToolingShuttles, these have been demounted for

transport. These must be mounted before commissioning. If you want to transport your

CrimpCenter you have to demount the Dual ToolingShuttle again.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments