Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 117

Page: 117 / 346

7. Installation / Mounting

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

117 | 268

Supplies

WARNING

Personnel Qualification and Personal Protective Equipment!

The following instructions are to be followed!

Maintenance work may only be executed by technical specialist.

See also chapter “Personnel Qualification” and “Personal Protective

Equipment”.

Fig. 48: Machine frame - Electrical and pneu-

matic supply

The electric and pneumatic supplies are

routed through the base frame beside the

pneumatic unit in the machine.

7.4

STATIONS

WARNING

Danger of injury during commissioning, adjustment and set-up

work!

The following instructions are to be followed!

DANGER

Risk of injury without personal protective equipment!

The following instructions are to be followed!

During maintenance personal protective equipment has to wared.

WARNING

Risk of tilting!

As soon as the screws are removed the station can tilt!

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Search results

Summary of Contents for CrimpCenter 64 SP

Reviews:

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 117 / 346

Search results

Summary of Contents for CrimpCenter 64 SP

Reviews: