6. Safety elements / danger areas
86 | 268
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
SAFETY ELEMENTS / DANGER AREAS
DANGER
Observe the following danger zones!
You find an overview of the machine areas and the permitted person
groups in chapter
"2.1 Personnel qualification (Page 15)"
.
The complete area of the processing space underneath the safety cov-
er and in the area of the belt feed:
Danger from mechanical moving parts
Danger from electrical current
Danger from sharp-edged components
Outside the machine:
Danger from moving wires in the feeding area outside the machine
Danger from mechanical moving parts
Risk of stumbling
The entire area of the machine and the base frame:
Danger from electrical current
Danger from mechanical moving parts
Danger from sharp-edged components
The whole area of the conveyor belt:
Danger from moving parts
Danger from crushing at the pneumatic controlled tilting tray
Please observe the safety instructions of the processing stations
installed on your CrimpCenter!
DANGER
Danger of injury due to manipulation!
There is a risk of getting burned!
The following instructions are to be followed!
The safety features of the product may never be manipulated
under any circumstances!
These manipulations include among others the following
the override of the of two-hand operation.
the bridging of switches.
the change of the machine software.
Modifications not approved by Schleuniger GmbH voids the oper-
ating license of the product.