5. Product description
58 | 268
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
WireCam
The WireCam is a system that monitors the stripping results
and certain properties of applied seals. A camera takes a pic-
ture of the processed wire end after the stripping process.
Based on the two-dimensional photos of the top view, the
software routines inspect each wire end and compares it to
the reference image in real time.
The operation is completely done with the CrimpCenter
software EASY
Easy and fast setup
Measurement results are displayed almost in real time
Crimp Force Monitoring (CFM 20) - Crimping Station
The CFM 20 integrated into the crimping station measures
the forces during crimping and creates a crimp curve. This
curve is compared with the previously learned crimp curve.
Contacts that have deviations outside the tolerances set by
the operator are disposed.
Prerequisite
Crimping station
SealCheck - Sealing Station
SealCheck checks if a seal has been fitted on the wire. If the
test is negative, the line is disposed.
Prerequisite
Sealing station
CrimpHeightMeasuring Device
With the crimp height measuring device, the crimp height
can be checked.
PullForceMeasuring Device
With the PullTester, the pull force can be checked. Depend-
ing on the type of PullTester, the values can only be dis-
played and used in the EASY software.