Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 244

Page: 244 / 346

9. Servicing / Maintenance

244 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

9.12

MAINTENANCE SHEET - PNEUMATICS - DRAIN CONDENSATION

Pneumatic - Drain Condensate

Task

Check and drain accumulated condensate.

Unit

Pneumatic Unit - Manometer

Duration

approx 1 min.

Interval

Monthly

Personnel qualifica-

tion

Qualified Personnel

Parts

Absorbent cloth

WARNING

Personnel Qualification and Personal Protective Equipment!

The following instructions are to be followed!

Maintenance work may only be executed by technical specialist.

See also chapter “Personnel Qualification” and “Personal Protective

Equipment”.

DANGER

Risk of injury if not observed!

You may suffer serious injuries, if the machine is switched on acciden-

tally!

The following instructions are to be followed!

Prior to operating the following points have to be observed:

Put the main switch in position "OFF"!
Protect the machine against reactivation.
Take appropriate measures to ensure, that only you can reactivate

the machine.
Affix a warning sign: "Do not switch on the Machine!"

DANGER

Risk of injury if not observed!

You may suffer serious injuries, if the machine is switched on acciden-

tally!

The pneumatic system is pressurized.
Working on pressurized system can cause serious accidents.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Search results

Summary of Contents for CrimpCenter 64 SP

Reviews:

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 244 / 346

Search results

Summary of Contents for CrimpCenter 64 SP

Reviews: