8. Commissioning
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
179 | 268
EASY-Software (5 / 11)
"Insert setup pin (long) in the gripper manually."
Gripper - Side 1
The highlighted setup pin will be needed. Take it out of the tool box.
13.
▹
Insert the set-up pin into the gripper.
» The gripper jaws must enclose the thin part of the pin.
14.
▹
Push-in the setup guide tube as far as it goes.
» The pin has to rest on the gripper jaws.
EASY-Software (7 / 11)
"Switch on the machine and align the pull-
off and swivel unit to the cross-hair by the
following user menu."
Operating area
15.
▹
Switch on the control voltage.
» The EASY menu for positioning the swivel opens.
Setup Pin
16.
▹
Align the setup pin with the arrow keys
on the screen centered in front of the
cross hairs.
17.
▹
Move the stripping until the ring touch-
es the shaft of the tip.
18.
▹
When the desired position is reached,
save the position.