manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 162 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 162

8. Commissioning

162 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

Pass the wire through wire feed and swivel arm

Before inserting the wire, make sure that the beginning of the wire is as straight as possible

and that the wire has no bends. If necessary straighten the wire manually.

Operating area

1.

▹

Switch off the control voltage!

Wire feeding unit

2.

▹

Press the switch / button with the sym-

bol shown.

» The feeding belts of the wire feeding

unit move together.

3.

▹

Guide the wire through the existing

guide.

4.

▹

Continue to run the cable until it touch-

es the belts of the toothed belt pulleys.

5.

▹

Press both switches / buttons with the

symbols shown.

» The CrimpCenter will take in the wire.

Route the wire through the complete guide

tube set.

6.

▹

Hold down the buttons until the wire

comes out at the end of the guide.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments