manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 216 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 216

9. Servicing / Maintenance

216 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

Swivel - Side 1

7.

▹

Carefully try to move the swivel arm side

1.

» A resistance must be noticeable.

8.

▹

Afterwards move the swivel arm with

force out of the current position.

» As soon as the resistance has been

overpowered an motor error message in

the EASY software appears.

» Now the swivel arm can be moved

easily.

EASY Software

9.

▹

Confirm the error message.

10.

▹

Switch to the "Sample" menu.

11.

▹

Bring the CrimpCenter into the initial

position with this button.

Notice

To do this, one of the confirm buttons must

be kept pressed until the CrimpCenter has

finished its movements.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments