manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 253 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 253

9. Servicing / Maintenance

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

253 | 268

9.15

MAINTENANCE SHEET - CHECK CONVEYOR BELT

Check conveyor belt

Task

Check the conveyor belt for damages and wearing

Unit

Conveyor belt

Duration

approx. 5 min.

Interval

Weekly

Personnel qualifica-

tion

Qualified Personnel

WARNING

Personnel Qualification and Personal Protective Equipment!

The following instructions are to be followed!

Maintenance work may only be executed by technical specialist.

See also chapter “Personnel Qualification” and “Personal Protective

Equipment”.

DANGER

Risk of injury if not observed!

You may suffer serious injuries, if the machine is switched on acciden-

tally!

The following instructions are to be followed!

Prior to operating the following points have to be observed:

Put the main switch in position "OFF"!
Protect the machine against reactivation.
Take appropriate measures to ensure, that only you can reactivate

the machine.
Affix a warning sign: "Do not switch on the Machine!"

1.

▹

Check the conveyor belt for damages and wearing.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments