Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 229

Page: 229 / 346

9. Servicing / Maintenance

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

229 | 268

Steel Surfaces - Stainless Steel (V2A)

Material

Lint-free cloth
Stainless steel cleaner
WD40 spray oil

Task

▹

Clean the surface with the stainless

steel cleaner.

▹

Afterwards rub the surface with an

oiled cloth.

Steel Surfaces - Crude Steel (not gliding)

Material

Lint-free cloth
WD40 spray oil

Task

▹

Rub the surface with an oiled cloth.

Steel Surfaces - Crude Steel (guide rails)

Material

Suitable lubricant (e.g. Castrol LMX

grease)

Task

▹

Check the linear guides for impurities

and deposits.

▹

Clean the guide rails with a cloth and

slightly oil them with the lubricant if

necessary.

▹

Make sure that no lubricant is applied to other areas, such as belts or electric parts.

▹

Remove excessive or dripping lubricant with an absorbent cloth.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Search results

Summary of Contents for CrimpCenter 64 SP

Reviews:

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 229 / 346

Search results

Summary of Contents for CrimpCenter 64 SP

Reviews: