Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 183

Page: 183 / 346

8. Commissioning

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

183 | 268

Referencing of the swivel arm side 2

EASY-Software (2 / 11)

"Take the setup block from the accessories."

Tool Box

▹

Take the appropriate setup block from the tool box.

EASY-Software (3 / 11)

"Clean the contact surfaces of the cutter

block support and of the setup block."

Cutting Unit - Cutter block support

10.

▹

Clean the contact surfaces of the cutter

blocks.

» The setup block can thus rest exactly.

EASY-Software (4 / 11)

"Place the setup block in the bottom sup-

port and fix it with the clamping screw."

Cutting Unit - Cutter block support

11.

▹

Place the setup block in the lower intake.

12.

▹

Insert the clamping screw.

» Tighten this.

Notice

The block can only be mounted in one direction.

Fig. 94: Set-up pin (1)

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Search results

Summary of Contents for CrimpCenter 64 SP

Reviews:

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 183 / 346

Search results

Summary of Contents for CrimpCenter 64 SP

Reviews: