manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 115 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 115

7. Installation / Mounting

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

115 | 268

7.3.2

Control cabinet

Open the control cabinet

WARNING

Personnel Qualification and Personal Protective Equipment!

The following instructions are to be followed!

Maintenance work may only be executed by technical specialist.

See also chapter “Personnel Qualification” and “Personal Protective

Equipment”.

2

1

The control cabinet of the 

CrimpCenter 64 SP

is behind the conveyor belt and beside the

machine base frame.

1.

▹

Slide down the protective cover over the

lock.

2.

▹

Insert the control cabinet key and

unlock the lock.

Transformator

DANGER

Risk of injury due to electrical voltage!

The following instructions are to be followed!

Training of staff shall be in compliance with government regula-

tions.

DANGER

Risk of injury due to electrical voltage!

Important when connecting the transformer:

Check the correct connection. Consult the wiring diagram.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments