5. Product description
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
41 | 268
Fig. 12: Swivel - Side 1
4
Swivel - Side 1
The swivel feeds the wire to the individual
processing stations, depending on the selec-
ted order data.
With the set of guide tubes suitable for the
wire, the wire is guided carefully, safely and
quickly.
Fig. 13: Guidance - Quick change device
With the quick-change device, the set of
guide tubes can be changed quickly and
easily.
No tools are needed for these activities.
Fig. 14: Cutting and stripping unit
5
Cutting and stripping unit
The stripping blades shown here on both
sides are V-stripping blades.
The cutting blades are available in different
versions.
The bad part cutting blades (the lower one is
not visible here) cut off the end of the line in
case of faulty processing.
Over the bad piece slide these wire ends
slide in a collection container.
The quick-release fasteners on the cutter
blocks make it easy and quick to change
blades outside the CrimpCenter.
Notice
Depending on the wire to be processed, better results can be achieved with other blades.
When choosing the right blades, the
Schleuniger
Service is happy to help.