manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 241 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 241

9. Servicing / Maintenance

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

241 | 268

Reject Contact Blade - Bottom

6.

▹

Lift the wire centering by hand.

7.

▹

Remove the screws.

» Keep this.

8.

▹

Remove the existing blade.

9.

▹

Insert the new blade.

10.

▹

Insert the screws.

» Tighten these.

11.

▹

Push the conveyor belt back to the machine and secure it with the securing screw.

12.

▹

Mount the upper cover of the cutting unit.

Conveyor belt

13.

▹

Push the conveyor belt back to the CrimpCenter and fix it.

Caution

Please note the instructions for moving the conveyor belt.

14.

▹

Mount the upper cover of the cutting unit.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments