manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 132 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 132

8. Commissioning

132 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

8.6

STARTING CONDITIONS

Before the CrimpCenter can be started, the following conditions must be met.
Note that for the individual points the

1.

▹

The CrimpCenter must be properly installed and mounted.

"4.3.1  Installation Location (Page  32)"

2.

▹

The CrimpCenter must be properly connected to the power supply and pneumatic sup-

ply.

"4.3.3  Position of the supply (Page  34)"

 

"4.3.2  Electric and Pneumatic Connection (Page  33)"

Fig. 56: Emergency stop switch - inactive

3.

▹

All existing emergency stop switches

must not be activated.

"6.2  Emergency Stop Switch (Page  88)"

4.

▹

All safety devices must be in perfect order.

"6  Safety elements / danger areas (Page  86)"

5.

▹

All components including cables and hoses must be in perfect order.

6.

▹

All fuses in the control cabinet must be in perfect order.

7.

▹

The power supply must be in perfect order.

Caution

The moment the pneumatic valve is opened, pneumatic controlled assemblies, for example

the gripper, can move automatically.

Caution

There is a risk of injury by crushing and by automatic starting. Make certain, that no persons

are near the machine.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments