Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 228

Page: 228 / 346

9. Servicing / Maintenance

228 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

Notice

The following pictures are examples of the materials, surfaces and products to be cleaned.

Touchscreen

Material

Microfiber cloth
clean water

Task

▹

Lightly moisten the microfiber cloth.

▹

It is recommend to observe the clean-

ing and care instructions of the monitor

manufacturer!

PET surfaces

Material

Microfiber clothes (minimum metal

parts)
Glass cleaner

Task

▹

Wet a cloth with detergent and clean

the surface.

▹

Dry the surface with a dry cloth.

Plastic / Rubber / Eladur

Task

▹

No cleaning!

Tinning Station / Surrounding Parts

Material

Lint-free cloth
WD40 spray oil

Task

▹

Clean the outside of the flux tank, the tinning station and surrounding parts in conformi-

ty with the Flux manufacturer´s instructions.

▹

Clean the metal surfaces with an oil saturated cloth.

▹

Clean other surfaces with an oil saturated cloth.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Search results

Summary of Contents for CrimpCenter 64 SP

Reviews:

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 228 / 346

Search results

Summary of Contents for CrimpCenter 64 SP

Reviews: