manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 256 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 256

11. Decommissioning / disposal

256 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

11.2

DISASSEMBLY / DISPOSAL

NOTICE

Recycling according to legal regulations!

The following instructions are to be followed!

Disassemble the machine appropriately.
Dispose of the disassembled parts according to the local legal

requirements.

Products Schleuniger mainly consist of the following materials:

Material

Disposal

Aluminum

Scrap metal

Steel

Scrap metal

Other metal

Scrap metal

Electric parts

Electronic waste

Plastics

Recycling

NOTICE

Recycle the battery according to regulations!

The battery in this product contains heavy metals which are harmful to

the environment and is therefore hazardous waste.

The following instructions are to be followed!

Recycle the battery!

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments