manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 238 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 238

9. Servicing / Maintenance

238 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

Exchanging cutting and stripping blades

Before the blades can be replaced, the cutter blocks must be removed.

Cutting unit

4.

▹

Move the swivel side 1 out of the cutting

unit area.

5.

▹

Move the swivel side 2 out of the cutting

unit area.

Cutting Unit - Cutter block

6.

▹

Hold fast the upper cutter block.

7.

▹

Remove the upper marked clamping

screw.

» Keep this.

8.

▹

Remove the upper cutter block.

» Keep this.

9.

▹

Remove the lower clamping screw.

» Keep this.

10.

▹

Remove the lower cutter block.

» Keep this.

Cutter Block - Change Blades

Caution

Remember the way the blades are assembled! Each blade has a front and a back side!
Observe the following stacking arrangement!

Upper cutter block

Fig. 116: Cutter block - top

11.

▹

Remove the screws.

» Keep this.

12.

▹

Remove the existing blades.

13.

▹

Place the new blades.

14.

▹

Insert the screw.

» Tighten these.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments