Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 185

Page: 185 / 346

8. Commissioning

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

185 | 268

Preparing CrimpCenter for production again

EASY-Software (8 / 11)

"Remove the setup pin from the gripper."

Gripper - Side 1

19.

▹

Remove the set-up pin.

» Put it back to the tool box.

EASY-Software (9 / 11)

"Remove the lower clamping screw."

Cutting Unit - Cutter block support

20.

▹

Remove the clamping screw.

» Keep this.

EASY-Software (10 / 11)

"Remove the setup block from the cutting

unit and put it back to the accessories.

Cutting Unit - Cutter block support

21.

▹

Remove the setup block.

» Put it back to the tool box.

EASY-Software (17 / 18)

"Insert cutter blocks."

CrimpCenter

22.

▹

Mount the upper cutter block.

23.

▹

Hold fast the upper cutter block.

24.

▹

Insert the clamping screw.

» Tighten this.

25.

▹

Mount the lower cutter block.

26.

▹

Insert the clamping screw.

» Tighten this.

The referencing is completed.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Search results

Summary of Contents for CrimpCenter 64 SP

Reviews:

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 185 / 346

Search results

Summary of Contents for CrimpCenter 64 SP

Reviews: