11. Decommissioning / disposal
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
255 | 268
DECOMMISSIONING / DISPOSAL
CAUTION
Risk of injury if operated by unqualified personnel!
Disregarding may lead to injury.
The following instructions are to be followed!
Training of staff shall be in compliance with government regula-
tions.
DANGER
Risk of injury due to electrical voltage!
There is a danger of electric shock!
Even after the machine has been disconnected from the power supply
wires are energized.
The following instructions are to be followed!
Do not touch the wires.
Set up the barrier.
11.1
DECOMMISSIONING
To decommission the machine proceed as follows:
1.
▹
Close the safety cover.
2.
▹
Click the button "System" in the top right corner of the touch screen.
Select in the following dialogues "Quit" and then "Shut down CrimpCenter".
3.
▹
As far as the request to switch off the CrimpCenter appears on the screen, switch off the
main switch.
Before switching on the CrimpCenter again wait at least 5 minutes.
4.
▹
Unplug the machine from the mains.
5.
▹
Interrupt the air pressure supply and remove the air hose.
6.
▹
Remove all interface cables connected to the peripheral devices and put them aside.
WARNING
Removing the Conveyor Belt!
Prior to removing the conveyor belt the supplies must be disconnec-
ted!
The following instructions are to be followed!
Never tear off cables and pneumatic hoses.
Always disconnect the cables and tubes appropriately.
Prior to release them, label the components and their position in
relation to one another.
Observe the instructions for external component units provided in
the manual of the manufacturer.
Observe the separate manuals of the processing stations and
options you are going to install, connect or disassemble.