manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 100 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 100

7. Installation / Mounting

100 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

7.2

POSITIONING / (DIS-) MOUNTING

7.2.1

(De-) Mounting - Transport Aid - Upper Bracket

Demounting

The bracket between the machine frame and control cabinet is a transport aid. Remove the

angle after the installation of the machine.

1.

▹

Remove the marked screws.

» Keep the screw(s) in a safe place.

2.

▹

Remove the bracket.

» Keep this.

Installation

Caution

Before shipping the CrimpCenter, mount the bracket.

1.

▹

Position the bracket in alignment with

the mounting holes.

» Hold the position.

2.

▹

Insert the marked screws.

» Tighten the screw(s).

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments