manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 160 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 160

8. Commissioning

160 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

Pass the wire through options

Depending on the configuration of the

CrimpCenter, the wire must be routed

through optional options.

Knot detection

The cable is guided through a ceramic bushing and a perforated disc in front of the straight-

ener.

Fig. 74: Straightener - Ceramic bushing

Fig. 75: Straightener - Perforated disc

1.

▹

Turn the perforated disk to the diameter you need.

2.

▹

Guide the wire to be produced through the ceramic bush and the perforated disc.

» The wire must be able to move smoothly through the opening.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments