9. Servicing / Maintenance
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
207 | 268
9.5.5
Safety Cover - Safety Switch
» Safety Cover - Safety Switch
Task
Check the safety cover - safety switch for damage, firm seat and
function.
Duration
-
Interval
-
Personnel qualifica-
tion
Qualified Personnel
1.
▹
The operating company has to make sure that the safety devices are checked yearly
according to the following instruction.
➥
The checks must be recorded.
➥
It is recommend taking the checks into the operator instruction.
Should one of the tests be negative, you must follow the following points!
Stop the machine immediately!
Immediately contact the service of Schleuniger!
WARNING
Personnel Qualification and Personal Protective Equipment!
The following instructions are to be followed!
The test and report may only be executed by technical specialists.
See also chapter “Personnel Qualification” and “Personal Protective
Equipment”.
Element
Status / Condition / Position
Main Switch
On
Emergency stop switch (All)
Not pressed
Control voltage
On
Safety Cover
Bottom
EASY Software
Started and logged in
Persons
2
Before the test is carried out, it must be changed into the following EASY menu.
Press the following button:
Caution
The following test must be carried out one after the other for all existing switches and but-
tons!