manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 59 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 59

5. Product description

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

59 | 268

5.4

FACT SHEET

5.4.1

Available Stations

Not the right product for your application?

Talk to us and / or visit our website. 

Schleuniger

 will be glad to provide you with information

about all available products, all the latest news, as well as customized solutions for your indi-

vidual requirements.

 

Crimping Station - UniCrimp 221

The UniCrimp 221 is a crimping station that processes high-performance crimp contacts on

CrimpCenter series crimping machines. In addition to the integrated crimp force monitor

CFM 20, it has a height-adjustable substructure. The UniCrimp 221 processes crimp contacts

in strip form for longitudinal and transverse transport with mechanical or electrical feed.

Suitable for precise high-speed crimping
Integrated crimp force monitoring
Manual crimp height adjustment
All standard crimping applicators can be used

Scope of Application

The UniCrimp 221 is a crimping station for high-speed pro-

duction on CrimpCenter series crimping machines. The

station has the integrated Schleuniger Crimp Force Moni-

toring CFM 20 and a height-adjustable substructure. It pro-

cesses crimp contacts in strip form for longitudinal and

transverse transport with mechanical or pneumatic feed. Due to its speed and precision, the

UniCrimp 221 is excellently suited for the automatic processing of wires up to a cross-section

of 6 mm².
The mechanical changeover of the stroke from 40 mm to 30 mm considerably extends the

field of application. The crimping station has a wide range of clamping dimensions, from

135.78 mm for standard tools up to 190 mm. In addition, integrated LED lighting illuminates

the work area for improved visibility.

 

Maximize Productivity

To shorten set-up times when changing

applicators, the UniCrimp 221 has a quick-

release clamping plate. The ToolingShuttle

30 or ToolingShuttle 61 can be used to pre-

pare the crimping applicator, contact spool

and paper winder for production while the

CrimpCenter is producing. The crimping

applicator and the contact coil are mounted

on the ToolingShuttle and replaced at the

same time, which significantly reduces

machine downtime with frequent tool

changes.

Options

Carrier strip cutter
Guide plate for longitudinal transport

contact strip
Accessory kit for pneumatic crimping

applicators
SplitCycle processing capability
Various adapter kits for non-standard

crimping applicators

(including different closing heights)
Backlash-free crimping applicator holder

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments