manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 101 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 101

7. Installation / Mounting

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

101 | 268

7.2.2

(De-) Mounting - Transport Aid - Dual ToolingShuttle

Demounting

Two transport aids are mounted on each Dual ToolingShuttle. These must be dismantled

before commissioning.

Each Dual ToolingShuttle is connected to the

platform with a transport aid in the upper

area and to the machine frame in the lower

area.

1.

▹

Remove the marked screws.

» Keep the screw(s) in a safe place.

2.

▹

Remove the marked washers.

» Keep the washer(s) in a safe place.

3.

▹

Remove the bracket.

» Keep these.

4.

▹

Loosen the quick release and remove

the disc.

» Keep these.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments