manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 46 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 46

5. Product description

46 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

Seal - One end | Crimp - Both ends

The wire is crimped on both sides and equipped with seal on

one side.

Prerequisite

Crimping station - Side 1
Crimping station - Side 2
Sealing station - Side 1 / Side 2

Seal - Both ends | Crimp - Both ends

The wire is crimped and equipped with seals on both sides.

Prerequisite

Crimping station - Side 1
Crimping station - Side 2
Sealing station - Side 1
Sealing station - Side 2

Coaxial - Both ends | Crimp - One end

The coaxial wire is stripped on both sides and crimped on

one side.

Prerequisite

Coaxial stripping station - Side 1
Coaxial stripping station - Side 2
Crimping station - Side 1 / Side 2

Doubling Crimp | Same terminals

Two wires are brought together on one side and crimped.

The two wire ends of the other side are individually crimped

with crimp of the same type.

Prerequisite

Crimping station - Side 1
Crimping station - Side 2
Double gripper module - Side 2

Doubling Crimp | Different terminals

Two wires are brought together on one side and crimped.

The two wire ends of the other side are individually crimped

with crimp of different type.

Prerequisite

2 Crimping stations - Side 1
Crimping station - Side 2
Double gripper module - Side 2

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments