manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 143 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 143

8. Commissioning

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

143 | 268

8.7.5

Insert and align the conveyor belt

Conveyor belt - GM - 4m - Setting up, inserting and aligning

The conveyor belt is later secured with a tog-

gle screw on the CrimpCenter. This screw is

attached to the conveyor belt (4 meter mod-

ules).

1.

▹

Unscrew the screw.

2.

▹

Set it aside.

3.

▹

Carefully bring the conveyor belt to the

base machine.

Notice

There is a risk of collision between the con-

veyor belt and the socket on the control cab-

inet.

The height of the conveyor must be adjus-

ted. The slide rail of the conveyor belt must

be at the height of the intake on the Crimp-

Center.

4.

▹

Bring the slide rail to the correct height

by turning the adjusting screws on the

feet of the conveyor belt.

5.

▹

Place the spirit level, as in the picture on

the foot of the conveyor belt.

The conveyor belt must be aligned using the

spirit level.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments