manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Original Operating Manual, Page: 93 / 346

Share
Download
Schleuniger CrimpCenter 64 SP Original Operating Manual Download Page 93

6. Safety elements / danger areas

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

93 | 268

6.4

CONFIRM BUTTONS

WARNING

Danger of injury during commissioning, adjustment and set-up

work!

The following instructions are to be followed!

It is not possible to produce, when the safety cover is open. There are several confirm but-

tons on the machine to allow some rigging and setting-up operations.

Fig. 32: Operating area - Confirm button

Position of the confirm buttons

One confirm button is located in the

operating area.

Fig. 33: Wire feed - Confirm button

Position of the confirm buttons

One confirm button is located under-

neath the wire feed.

Fig. 34: CommandPod - Confirm Button

Position of the confirm buttons

One confirm button is located on the

CommandPod.

Summary of Contents for CrimpCenter 64 SP



























































































































































































































































































































































Reviews:

No comments