Sako SKI600, Manual

Page: 41 / 180

035
4.1 Function Code
F1 Group - Auxiliary Operating Parameters
Function
Code
Name Set Range
Minimum
Unit
Factory
Default
Modification
F1.19 Acc/Dec time unit 0: second 1: minute 2: 0.1s 1 0 ○
F1.20 Frequency setting of
forward jog operation
0.00 ～【F0.16】upper limit
frequency
0.01Hz 5.00 ○
F1.21 Frequency setting of
reverse jog operation
0.00 ～【F0.16】upper limit
frequency
0.01Hz 5.00 ○
F1.22 Jog Acc time
0.1 ～ 3600.0s
0.4 ～ 4.0KW 7.5s
5.5 ～ 30.0KW 15.0s
37.0 ～ 132.0KW 40.0s
160.0 ～ 630.0KW 60.0s
0.1s
Depending
on model
○
F1.23 Jog Dec time 0.1s
Depending
on model
○
F1.24 Jog interval time 0.0 ～ 100.0s 0.1s 0.1 ○
F1.25 Hopping freq.1 0.00 ～ upper limit freq. 0.01Hz 0.00 ○
F1.26 Hopping freq.1 range 0.00 ～ upper limit freq. 0.01Hz 0.00 ○
F1.27 Hopping freq.2 0.00 ～ upper limit freq. 0.01Hz 0.00 ○
F1.28 Hopping freq.2 range 0.00 ～ upper limit freq. 0.01Hz 0.00 ○
F1.29 Hopping freq.3 0.00 ～ upper limit freq. 0.01Hz 0.00 ○
F1.30 Hopping freq.3 range 0.00 ～ upper limit freq. 0.01Hz 0.00 ○
F1.31
Action when set freq. is
lower than lower limit
freq.
0: run at lower limit freq.
1: run at zero freq. after delay
time (start without delay)
2: stop after delay time (start
without delay)
1 0 ×
F1.32
Delay time of stopping
when freq. is lower
than limit (simple
sleep)
0.0 ～ 3600.0s 0.1s 10.0 ○
F1.33 Zero freq. brake
current
0.0 ～ 150.0%*rated current
of motor
0.1 0.0 ×
F1.34 FWD/REV transition
time
0.0 ～ 100.0s 0.1s 0.0 ○
F1.35 FWD/REV switch mode 0: over zero freq. switch
1: over start freq. switch
1 0 ×
F1.36
Standby deceleration
time when emergency
brake
0.1 ～ 3600.0s 0.1s 1.0 ○