Sako SKI600, Manual, Page: 136 / 180

130
FA.35
Detection time of too large speed
deviation (reserved)
0.0 ～ 100.0s
0.5
FA.31
Overspeed detection value
0.0 ～ 50.0%*【F0.15】
max. freq.
0.0%
FA.32
Overspeed detection time
0.0 ～ 100.0s
5.0
FA.34
Detection value of too large speed
deviation (reserved)
0.0 ～ 50.0%*【F0.15】
max. freq.
0.0%
FA.29
Output ground protection when
power on (reserved)
0 ～ 1
0
0: invalid
1: valid
FA.30
Over speed protection action (reserved)
0 ～ 2
2
0: protection action and coast to stop
1: alarm and decelerate to stop
2: alarm and keep on running
FA.33
Action of big speed deviation (reserved)
0 ～ 2
0
0: protection action and coast to stop
1: alarm and decelerate to stop
2: alarm and keep on running
4.2 Detailed Function Description
FA.28
EEPROM read-write error action
0 ～ 1
0
0: protection action and coast to stop
1: alarm and keep on running
If keypad communication didn't receive the
right data signal during the time defined by
this parameter, then keypad communication
error is confirmed and the driver will respond
with corresponding action based on FA.26
setting.
FA.27
Operation panel communication
timeout detect
0.0 ～ 100.0s
1.0
FA.24
Action of RS485 communication error
0 ～ 2
1
0: protection action and coast to stop
1: alarm and maintain current operation
2: alarm and stop according to set mode
FA.25
RS485 communication timeout detect
0.0 ～ 100.0s
5.0
If RS485 didn't receive the right data signal
within the defined time by this parameter, the
RS 485 communication error is confirmed and
the driver will respond with corresponding
action based on FA.24 setting. The RS485
communication timeout detection will be
disabled if this parameter is set at 0.0.
FA.26
Action of operation panel
communication error
0 ～ 2
1
0: protection action and coast to stop
1: protection action and maintain the current
operation
2: protection action and stop according to set
mode