Sako SKI600, Manual

Page: 29 / 180

023
PRG
PRG
ENTER
ENTER
0.00 F0.00 F1.20
F1.21
5.00
10.00
▲ ▼
▲ ▼
Escape
3.9 User Password Setting and Function Code Edit
User password setting is used for preventing unauthorized people form checking and modifying
function parameter. Factory set of user password F0.00 is "00000", user can conduct parameter
setting in this interface (parameter set here is only not restricted by password protection, but
is restricted by conditions like whether is revisable during running, the monitoring parameters,
etc.).
When setting the user password, press five-digit number and press to confirm, the password
will take effect automatically 3 minutes later, or just power down to make it effective. After that,
if the password is not set right, keypad will display "-Err-", and when checking function codes, All
will display "-----" except the password item (displays "00000"). These function codes parameters
can't be checked and modified until the password is set right and the keypad displays"-En--".
When password modifying is required, choose function code F0.00, and press to enter
password authentication status. Move to modifying status after password verified successfully.
Input a new password and press to confirm.
Power-down or wait for 3 minutes, the new password will take effect.
Example 1: change user password "22222" to "55555", check function code F1.02.
Press to enter programming status, LED displays function code F0.00, flicker bit stays in
the ones place.
Press , move flicker bit among hundreds place, tens place and ones place of function
items.
ENTER
ENTER
ENTER
PRG
①
②