Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 703 / 1192

CLI Reference Web Authentication Configuration Commands
web-auth portal key key-string
no web-auth portal key
Parameter
Description
Parameter Description
key-string Communication key between the access device and the
authentication server. It includes up to 255 characters.
Defaults
No key is set.
Command
Mode
Global configuration mode
Usage Guide To use the Web authentication function, the communication key between the access device and the
authentication server must be set.
Configuration
Examples
Example 1: Set the communication key between the access device and the authentication server to
web-auth.
Ruijie(config)# web-auth portal key web-auth
Related
Commands
Command Description
http redirect Set the IP address of the authentication server.
http redirect homepage
Set the address of the authentication
homepage.
web-auth port-control Enable the Web authentication on the port.
Platform
Description
N/A
web-auth port-control
This command is used to enable Web authentication on a port. The no form of this command is used
to disable Web authentication on a port.
web-auth port-control [ ip-only-mode ]
no web-auth port-control
Parameter
Description
Parameter Description
ip-only-mode By default, when a user passes Web authentication, its IP and MAC
addresses are bound with the port. A MAC address may correspond
to several IP addresses, so when the physical interface is connected
to a L3 device, this parameter must be set to bind the only IP address
of the authenticated user with the port. After the mode switchover, all