Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 801 / 1192

CLI Reference NFPP Configuration Commands
Default
The default percent values of each type of packets occupied in the
buffer area are:
Manage packets: 30;
Route packets: 20;
Protocol packets: 45.
Command
mode Global configuration mode.
Examples
Ruijie(config)# cpu-protect sub-interface manage
percent 60
Related
commands
Command Description
cpu-protect
sub-interface
{ manage |
protocol |
route } pps
Configure the traffic bandwidth of
each type of packets.
arp-guard attack-threshold
Use this command to set the global attack threshold. When the packet rate exceeds the attack threshold,
the attack occurs.
arp-guard attack-threshold { per-src-ip | per-src-mac | per-port } pps
Parameter
description
Parameter Description
per-src-ip
Set the attack threshold for each
source IP address.
per-src-mac
Set the attack threshold for each
source MAC address.
per-port Set the attack threshold for each port.
pps
Set the attack threshold, in pps. The
valid range is [1,9999].
Default
Settings
By default, the attack threshold for each source IP address and
source MAC address is 8pps; and the attack threshold for each port is
200pps.