Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 823 / 1192

CLI Reference NFPP Configuration Commands
dhcpv6-guard enable
Use this command to enable the DHCPv6 anti-attack function.
Dhcpv6-guard enable
Parameter
description
Parameter Description
-
-
Default
Settings
Disabled
Command
mode
NFPP configuration mode.
Usage
guidelines N/A
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# dhcpv6-guard enable
dhcpv6-guard isolate-period
Use this command to set the isolate time globally.
dhcpv6-guard isolate-period { seconds | permanent }
Parameter
description
Parameter Description
seconds
Set the isolate time, in seconds. The
valid range is 0, or [30, 86400].
permanent
Permanent isolation.
Default
Settings The default isolate time is 0, which means no isolation.
Command
mode NFPP configuration mode.
Usage
guidelines
The isolate period can be configured globally or based on
the interface. For one interface, if the isolate period is not
set based on the interface, the global value shall be