CLI Reference
IP Routing Configuration Commands
ip routing
Use this command to enable IPv4 routing in global configuration mode. Use the
no
form of this
command to disable the function.
ip routing
no ip routing
Default
configuration
Enabled
Command
mode
Global configuration mode.
Usage
guidelines
IP routing is not necessary when the switch serves as bridge or VoIP
gateway.
The S2600-I series products support only the IPv4 or IPv6 static
routes, and IPv4 or IPv6 directly connected route.
Configure the static route to obtain the IPv4 or IPv6 static route.
Configure the IP address of the SVI to obtain the IPv4 or IPv6
directly connected route.
Examples
The following example disables IP routing
no ip routing
Related
commands
N/A
Platform
description
N/A
ip static route-limit
Use this command to set the upper threshold of the static route. Use the
no
form of this command to
restore the setting to the default value.
Summary of Contents for RG-S2600G-I Series
