Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 952 / 1192

CLI Reference Guide QoS Configuration Commands
drop
Drop the packets exceeding the
bandwidth.
dscp-value
Overwrite the DSCP value of the
packets exceeding the bandwidth,
whose range varies with products.
cos-value
Modify the Cos value of the packet of
over-bandwidth, in the range of 0 to 7.
Command
mode Global configuration mode
Examples
Create a policy map and name it as po
Ruijie(config)# policy-map po
Associate class-map cm
Ruijie(config-pmap)# class cm
Set the DSCP value as 10
Ruijie(config-pmap-c)# set ip dscp 10
Set the bandwidth as 1M, the burst traffic as 4096k, and the method
for handing the excessive part to assign the new DSCP value of 16 .
Ruijie(config-pmap-c)# police 1000000 4096 exceed-action dscp 16
Related
commands
show policy-map
service-policy
Use this command to apply the policy map on the interface or the virtual-group.
service-policy { input | output } policy-map-name
no service-policy { input | output }
Parameter
description
Parameter Description
policy-map-name Name of the created policy map
no
Cancel the application of the policy map on the
interface or the virtual-group.
Command
mode Interface configuration mode, and virtual-group configuration mode.
Examples
Ruijie(config)# interface fastEthernet 0/1