Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 861 / 1192

CLI Reference NFPP Configuration Commands
Command
mode NFPP define configuration mode
Usage
guidelines
If the monitored host number has reached the default
1000, the administrator shall set the max-number smaller
than 1000 and it will prompt the message that %ERROR:The
value that you configured is smaller than current
monitored hosts 1000, please clear a part of monitored
hosts. to remind the administrator of the invalid
configuration and removing the monitored hosts.
When the maximum monitored host number has been
exceeded, it prompts the message that
% %
NFPP_DEFINE-4-SESSION_LIMIT: Attempt to exceed limit of
name’s 1000 monitored hosts
. to remind the administrator.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# nfpp define tcp
Ruijie(config-nfpp-define)# monitored-host-limit 500
Related
commands
Command Description
show nfpp define
summary
Show the user-defined
anti-attack configurations
monitor period
Use this command to set the monitoring time.
monitor-period seconds
Parameter
description
Parameter Description
seconds
Set the monitor time, in seconds. The
valid range is [180, 86400].
Default
Settings 600s
Command
mode NFPP define configuration mode.
Usage

When the attacker is detected, if the isolate period is