Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 666 / 1192

CLI Reference 802.1X Configuration Commands
Defaults
The default Hello message sending interval is 20 seconds.
Default user alive interval is 250 seconds
Command Mode
Global configuration mode
Usage Guide
Configure the client-alive probe timer. Use the show dot1x command to view the
802.1x setting.
Configuration
Examples
The following example shows how to set the Hello message sending interval to 30
seconds and the alive interval to 120 seconds:
Ruijie# configure terminal
Ruijie(config)# dot1x probe-timer interval 30
Ruijie(config)# dot1x probe-timer alive 120
Ruijie(config)# end
Ruijie# show dot1x probe-timer
Hello Interval: 30 Seconds
Hello Alive: 120 Seconds
Related Commands
Command Description
Show dot1x
probe-timer
It shows the client probe timer's configuration.
Platform
Description
-
dot1x re-authentication
Use this command to require periodic re-authentication for applicants. Use the no form of the
command to restore the default setting.
dot1x re-authentication
no dot1x re-authentication
Parameter
Description
-
Defaults Not required
Command Mode Global configuration mode
Usage Guide
If this command is used, applicants will have to get re-authenticated periodically
after they pass the authentication. Use the show dot1x command to show the
802.1X setting.
Configuration The following example shows how to enables the re-authentication function: