Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 625 / 1192

CLI Reference RADIUS Configuration Commands
retransmit packet retransmissions.
radius-server
key
Define a shared password for the
RADIUS server.
radius-server dead-ctriteria
This global configuration command is used to configure criteria on a device to determine that the Radius
server is unreachable. The no form of this command is used to restore the default value.
radius-server dead-criteria { time seconds [ tries number ] | tries number }
no radius-server dead-criteria { time seconds [ tries number ] | tries number }
Parameter
description
Parameter Description
time seconds
Configure the timeout value. If the
device does not receive a correct
response packet from the Radius
server within the specified time, the
Radius server is considered to be
unreachable. The value is in the
range of 1s to 120s.
tries number
Configure the successive timeout
times. When sending a request from
the device to the Radius server times
out for the specified times, the device
considers that the Radius server is
unreachable. The value is in the
range of 1 to 100.
Default
time seconds
:
60s.
tries number
:
10.
Command
mode Global configuration mode.
Usage
guidelines
If a Radius server meets the timeout and timeout times at the same
time, it is considered to be unreachable. This command is used to
adjust the parameter conditions of timeout and timeout times.
Examples
The following example sets the timeout to 120s and timeout times to
20.
Ruijie(config)# radius-server dead-criteria time 120 tries 20
Related
Command Description