Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 638 / 1192

CLI Reference Configuration Commands
guidelines server, use this command to set the source address of
packet. This command specifies the first ip address of the
specified interface as the source address of packet and is
used on L3 devices.
Examples
The following example specifies packet to obtain ip
address from fastEthernet 0/0 as the source address of
packet :
Ruijie(config)# ip tacacs source-interface fastEthernet 0/0
Related
commands
Command Description
tacacs-server
host
Define server.
ip address Configure ip address of the interface.
tacacs-server host
Use this command to configure IP address of server host:
tacacs-server host { ip-address | ipv6-address } [ port integer ] [ timout integer ] [ key string ]
no tacacs-server host { ip-address | ipv6-address }
Parameter
description
Parameter Description
ip-address IP address of server host.
ipv6-address IPv6 address of server host.
port integer TCP port used in
communication.
timeout integer
Timeout time of host.
key string Shared keyword of client and
server.
Default
Configuration No specified host.
Command
mode Global configuration mode.
Usage
guidelines
To use to implement AAA security service, you must
define secure server. You can define one or multiple
secure servers by using tacacs-server host.