Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 34 / 1192

CLI Reference Guide Basic Configuration Management
output Regard data output as the input to determine whether timeouts.
Defaults The default timeout is 0 min.
Command Mode LINE configuration mode.
Usage Guide
If there is no input/output information for the session to the remote terminal established in current
LINE within specified time, this connection will be interrupted, and this LINE will be restored to
the free status.
Configuration
Examples
The example below specifies the timeout of session is 5 minutes.
Ruijie(config-line)#exec-timeout 5 output
Related
Commands
Command Description
- -
Platform
Description
-
show boot
Use this command to show the boot related configuration of the device.
show boot { config | network |system [ switch all | switchid ] | ip }
Parameter
Description
Parameter Description
config
Show the configuration of the startup-config filename.
network Show the configuration of the network startup-config filename.
system Show the configuration of the startup main program filename.
ip Show the configuration of local IP address used in the device starting.
all
Show the boot path information of all devices in the VSU system in VSU
mode.
switchid Device ID
Defaults -
Command Mode Privileged EXEC mode