Ruijie RG-S2600G-I Series, Cli Reference Manual

Page: 842 / 1192

CLI Reference NFPP Configuration Commands
Default
Settings Enabled
Command
mode NFPP configuration mode.
Usage
guidelines N/A
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# ip-guard enable
Related
commands
Command Description

nffp ip-guard enable
Enable the IP anti-scan
function on the interface.
ip-guard isolate-period
Use this command to set the isolate time globally.
ip-guard isolate-period { seconds | permanent }
Parameter
description
Parameter Description
seconds
Set the isolate time, in seconds. The
valid range is 0, or [30, 86400].
permanent
Permanent isolation.
Default
Settings The default isolate time is 0, which means no isolation.
Command
mode NFPP configuration mode.
Usage
guidelines N/A.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# ip-guard isolate-period 180